Vertical Twin spindle NC Rotary Table
RT-147
The RT-147 has been designed for use on horizontal machining centers. The RT-147 is available with dual or quad face plates and can be accessorized with a swivel box (option) for cable management. These tables are typically equipped with rotary joints for use in high production machining environments.
Features
- Vertical twin spindle model
- Dual or quad face plate is available
- Aggregating machining processes
Application
- For Horizontal machining center
- For bundled machining for mass-produced parts
Specifications
Specifications | Unit:mm | RT-147 |
---|---|---|
Table diameter | ø160 | |
Center height | 135/315 | |
Center bore | ||
・Nose diameter | ø50H7 | |
・Through-bore | ø30 | |
Table T-slot width | 12H8 | |
Guide block width | 18h7 | |
Servo motors (For Fanuc) | αiF4 | |
Inertia converted into motor shaft | x10-3kg・m2 | 0.247 |
Net weight | kg | 80 |
Speed reduction ratio | 1/90 | |
Table max. rpm | min-1 | 33.3 |
(Motor rpm: 3,000min-1) | ||
Indexing accuracy (the sum) |
arc sec | 45 |
Repeatability | arc sec | 8 |
Clamp system | Pneumatic | |
Clamp torque/pneumatic pressure 0.49MPa | N・m | 156 |
Allowable work weight | ||
・Vertical setting | kg per axis | 75 |
Dimensions
*Other sizes are available. Please contact Tsudakoma sales.