BallDrive NC Tilting Rotary table
TBS type (Ø130)
TBS -Tilting Rotary table with Ball Drive system- models feature positive drive without backlash through constant pre-loaded pressure on the Ball Cam Shaft and Turret, which insures minimal wear through the long life of the drive system. The highly rigid Ball Drive System allows machining without clamping and thus minimizes machining cycle time.
Features
- High Speed Indexing
- No backlash, High rigidity
- Save energy by high transfer efficiency
- Extremely small aging deterioration
- Adopt high response clamp mechanism (newly-developed)
- Space saving
Application
- High precision parts machining
- 5-axis complex machining
- For electric components like smart phone
Specifications
Specifications | Unit:mm | TBS-130 | |
---|---|---|---|
Rotary axis | Tilting axis | ||
Tilting Range | -30° to +110° | ||
Spindle diameter | Ø90h7 | ||
Table height at 0° position | 225 | ||
Center height at 90° position | 160 | ||
Center bore | |||
・Nose diameter | Ø55H7 | ||
・Through-bore | Ø40 | ||
Servo motors (For Fanuc) | αiS2 | αiS2 | |
Inertia converted into motor shaft | x10-3kg・m2 | 0.121 | 0.14 |
Net weight | kg | 120 | |
Speed reduction ratio | 1/48 | 1/60 | |
Table max. rpm | min-1 | 62.5 | 50 |
(Motor rpm: 3,000min-1) | |||
Indexing accuracy (the sum) |
arc sec | 20 | |
Tilting accuracy Tilt 0° to 90° | arc sec | 30 | |
Clamp system | Pneumatic | ||
Clamp torque/pneumatic pressure 0.49MPa | N・m | 250(500)* | 250(500)* |
Allowable work weight | |||
・0°(Horizontal) | kg | 35 | |
・0° to 90°(Tilting) | kg | 20 |
*High Clamp Torque model