Direct Drive Smart Slim NC Rotary table
RDS-200 (SmartDD)
Slim body provides full use of machining area with various features of DD motor including high speed rotation.
This is best and smartest model for mass-production of automobile and computer parts on small machining centers.
Features
- Maximum speed 300min-1
- Thinness 164mm, ultra slim and smart design
- Compact Rotary Joint is available
Application
- Mass produced small parts machining
- For Compact machining Center
Specifications
Specifications | Unit:mm | RDS-200 |
---|---|---|
Spindle diameter | ø83 | |
Center height | 160 | |
Center bore | ||
・Nose diameter | ø55H7 | |
・Through-bore | ø45 | |
Servo motors | Tsudakoma Developed | |
Net weight | kg | 65 |
Speed reduction ratio | 1/1 | |
Table max. rpm | min-1 | 300 |
Indexing accuracy (the sum) |
arc sec | 20* |
Repeatability | arc sec | 4 |
Clamp system | Pneumatic | |
Clamp torque/pneumatic pressure 0.49MPa | N・m | 600 |
Allowable work weight | 100 |
*Pitch error correction activated.