WE ARE HERE!!
NC Rotary table
RWA type (ø160)
RWA series, developed from RNA series, are Tsudakoma Flag Ship tables for versatile machining needs on variety of machining centers to drill-tapping centers. They offer optimum choice of cost effectiveness, production efficiency, and high quality machining.
Features
- Less process with standard NC rotary table.
- Compact rotary joint is available
- Adopt high response clamp mechanism
- Economic model RWE series is available
Application
- Mass produced small parts machining
- For Compact machining Center
Specifications
| Specifications | Unit:mm | RWA-160L |
|---|---|---|
| Spindle diameter | ø100 | |
| Table diameter | ø160 | |
| Center height | 135 | |
| Center bore | ||
| Nose diameter | ø55H7x45 | |
| Through-bore | ø40 | |
| Table T-slot width | 12H8 | |
| Guide block width | 14h7 | |
| Servo motors (For Fanuc) | αiS2 | |
| Inertia converted into motor shaft | x10-3kg・m2 | 0.09 |
| Net weight | kg | 40 |
| Speed reduction ratio | 1/72 | |
| Table max. rpm | min-1 (Motor rpm: 3,000min-1) |
41.6 |
| Indexing accuracy (the sum) |
arc sec | 25 |
| Clamp system | Pneumatic | |
| Clamp torque/pneumatic pressure 0.49MPa | N・m | 500 |
| Strength of worm gears | N・m | 206 |
| Allowable work weight | ||
| ・Vertical setting ( ) : with tailstock | kg | 100(200) |
