BallDrive NC Rotary Table
RG type (Ø160)
"RG series" Tsudakoma uniquely developed 'BallDrive' realizes no backlash and extremely small aging deterioration.
Clamp-less machining because of BDS high rigidity can minimize cycle time. Indexing speed is two times faster than conventional model.
Features
- High Speed Indexing
- No backlash, High rigidity
- Save energy by high transfer efficiency
- Extremely small aging deterioration
- Adopt high response clamp mechanism (newly-developed)
Application
- High precision parts machining
- Complex-shape parts like Turbine-blade by high efficiency machining
Specifications
Specifications | Unit:mm | RG-160R |
---|---|---|
Spindle diameter | ø100 | |
Table diameter | ø160 or ø200 (option) |
|
Center height | 160 | |
Center bore | ||
・Nose diameter | ø55H7 x 45 | |
・Through-bore | ø40 | |
Table T-slot width | 12H8 | |
Guide block width | 14h7 | |
Servo motors (For Fanuc) | αiF4 | |
Inertia converted into motor shaft | x10-3kg・m2 | 0.19 |
Net weight | kg | 60 |
Speed reduction ratio | 1/36 | |
Table max. rpm | min-1 | 83.3 |
(Motor rpm: 3,000min-1) | ||
Indexing accuracy (the sum) |
arc sec | 15 |
Repeatability | arc sec | 4 |
Clamp system | Pneumatic | |
Clamp torque/pneumatic pressure 0.49MPa | N・m | 500 |
Allowable work weight | ||
・Vertical setting ( ) : with tailstock | kg | 100(200) |
・Horizontal setting | kg | 200 |
Dimensions
*Other sizes, RG-250/320 is availble. Click here if you are interested in. [ Specifications ] [ Dimensions ]